Nowadays, the outside air in many factories and workshops is not very circulated. Of course, the humidity in the air is also lacking. This point should be taken seriously for manufacturers, and carelessness should not be ignored. If you want to build a very good production environment in the factory workshop, it is naturally inseparable from the requirement of air humidity.

Nowadays, with the continuous development of the times, the environment of many workshops and factories is gradually changing. Many large workshops and factories have installed large-scale central air-conditioning, which is also to improve the cleanliness of the workshop. Most of the workshops are fully sealed. In the autumn and winter, the air itself is low and the air is more boring due to the influence of air conditioning. In such an environment, static electricity is very easy to appear, which affects the production and quality of products. In a mass production environment, assuming that the key influencing factor of humidity is ignored, it will affect the manufactured products and it will be difficult to guarantee the accuracy of the manufactured products.

Automotive coating industry

In some entities of the automobile painting workshop, such as: spray booth, polishing room, glue booth and other important process parts, humidification devices should be installed, and the humidity should be controlled between 40% and 80% RH depending on the humidity in different seasons. This can eliminate static electricity, which is one of the factors that affect the painting process. The elimination of static electricity can prevent the volatile gas of the paint from burning and exploding. Avoid dust adhesion on the surface of the workpiece, improve the brightness and dust-free surface of the sprayed workpiece, create a good space for the surface painting of the partial installation of the workpiece, and improve the quality requirements of the whole car.

Tobacco industry

Tobacco industry: During the production and processing of cigarettes, each process in the production process has strict requirements on environmental humidity. In the process of tobacco processing, the packaging processes from cigarette storage, picking, redrying, silk making to rolling . The relative humidity can be controlled at 65 to 70% RH. As the humidity increases, the moisture content of the tobacco leaves increases, and the mechanical strength of the tobacco leaves is enhanced. This can reduce the breakage rate of tobacco leaves and shredded tobacco, and improve the yield and quality of finished products.

Printing industry

Printing industry: Printing quality is the life of a printing enterprise. To ensure high printing quality, not only good printing equipment, materials, and professional technology must be available, but also a good printing environment. The best working relative humidity of the printing workshop is controlled between 55 and 65% RH. In this way, the deformation of the paper and the misalignment of color overprinting are avoided. Static electricity can cause dust to be adsorbed on the surface of the paper during the printing process, which affects the quality of the printing. Static electricity can also cause the hidden danger of burning volatilized gases from printing solvents. Eliminate static electricity, ensure safe production, and improve printing efficiency and quality.

Textile industry

Relative humidity has a great influence on the quality of fiber yarns in the production process. It is expressed in terms of moisture regain, strength, elongation, flexibility and so on. The relative humidity of the textile workshop is controlled between 70% and 80% RH, the yarn strength is increased, the end breakage rate is reduced, the flying phenomenon of the working environment is reduced, the static electricity is eliminated, and the fiber stretching, carding, spinning and other processes can be carried out smoothly , Improve production rate and quality.

Telecommunications Industry

 The program-controlled subscriber exchange is an important part of the national public network and the core and center of the communication private network. The temperature and humidity requirements of the program-controlled computer room are an important part of the management of the computer room. Generally speaking, it is appropriate to keep the relative humidity in the computer room within the range of 40-60%RH. For the computer room, too dry air can easily cause electrostatic effects, causing damages such as breakdown of integrated circuit boards, and threatening the safety of switches at all times.

Cold storage preservation industry

With the improvement of people's quality of life, people have put forward higher requirements for the storage of fruits, vegetables, flowers, etc., and the temperature and humidity in the warehouse must be strictly controlled. When the humidity in the warehouse is insufficient, the relatively dry air will absorb moisture from the stored fruits and vegetables, which will cause the fruits and vegetables to lose water and become dry. The relative humidity should be controlled between 85-95%RH.

High-end hotels, office buildings, villas

Nesda humidifier is to meet people's needs for comfortable work and life. Dry indoor air can have adverse effects on people's health, especially in the northern regions in winter. People feel the most comfortable living and working in an environment with a temperature of 20 ~ 26 ℃ and a relative humidity of 40 ~ 60% rh, and they feel comfortable and have high work efficiency. Increase the humidity to eliminate the adverse effects of static electricity.

it

 At present, domestic electronic workshops are becoming more and more stringent. In order to ensure the quality of products, users must strictly control the temperature and humidity of the production workshop, especially the humidity. If it is too dry, static electricity is easily generated in the workshop, causing damage to the CMOS integrated circuit. (Note: The test shows that when the relative humidity is 20% RH, the electrostatic voltage in the workshop is 10000V, and when the relative humidity is as low as 10%, the voltage in the workshop is very easy to generate 20000V). In addition, too dry air will also cause the air Flying dust can induce respiratory diseases, affect the physical and mental health of workers, and reduce work efficiency! Generally speaking, the temperature of the electronic workshop is controlled at about 22 ℃, and the relative humidity is controlled at 40 to 60% RH. In this environment, people feel comfortable and static electricity disappears!