1. The impact of humidity on the distribution room
The internal humidity of the power distribution room has a great influence on the operation of power equipment. The more humid the environment, the more easily the power equipment is affected by the moisture in the air. The frost on the power equipment causes the power equipment to rust and short-circuit. Phenomenon, in order to ensure the normal operation of electrical equipment in the power distribution room, the best way is to use a dehumidifier to quickly and effectively eliminate moisture in the air and keep the environment dry.
The power distribution room/nuclear power plant space has high humidity, especially when it rains or the rainy season is more severe. It will cause the metal facilities in the power distribution room to be damp and rusty, the switchgear is short-circuited, and the sudden tripping is a manifestation of the power equipment after being damp. In severe cases, it may even cause damage to the power facilities. What's more serious is the serious economic losses caused by power outages and production outages in industries that use downstream power, which must be treated with caution.
2. Dehumidification solution
The switch cabinets in power distribution rooms/nuclear power plants all have temperature and humidity requirements, and the best humidity is 50%±5, but their geographical location-generally underground, suburban, mountainous and other places, the temperature and humidity environment is relatively harsh . Therefore, the humidity of the indoor environment where power facilities such as power distribution rooms/nuclear power plants are concentrated requires a dedicated power dehumidifier to control its humidity. The selection of dehumidifier equipment needs to be selected after professional calculations based on its working conditions.
NAISIDA industrial dehumidifier is a series of dehumidification equipment specially designed for various power distribution rooms and power facilities industries. There are various types such as conventional type, hand-push type, hoisting type, pipeline type, and wall-mounted type. Different use environment. It can prevent the metal facilities in the power distribution room from being damp and rusty, and the switchgear will cause a short circuit. Often sudden tripping is a manifestation of the power distribution room being damp, and even damage to the facilities in the power distribution room.
NAISIDA provides customers with high-efficiency, accurate and low-cost humidity control products and solutions with leading technology, exquisite craftsmanship, high-quality, and reasonable-priced dehumidification products, to escort safe production and contribute to power safety.
The dehumidification of the power distribution room is different due to the different use environment; the area of the power distribution room, the ambient temperature, the ventilation of the environment and other special circumstances will be different when it is selected. Generally, it is used for 60-120 cubic meters of dehumidification per 1KG. The space configuration and use can basically meet the humidity requirement of about 60%. If the working conditions of the power distribution room are more complicated, it must be strictly measured to achieve the best effect. You can contact our technical consultant through the national service hotline: 400 087 8799 Communication.