When using the dehumidifier, it is inevitable that you will encounter such and other problems and failures. Then when you use the dehumidifier, when you encounter frost and ice on the dehumidifier, how should we deal with it, let's take a look together.
Under normal conditions of use, it is normal for the dehumidifier to have frosting, especially when it is used at low temperatures. It is a common phenomenon. When there is too much frost on the two devices of the dehumidifier, the dehumidification effect will be reduced, so now dehumidification The machine is equipped with automatic electronic defrosting function. When entering the defrosting program, the compressor does not start, only the fan is rotating, so there is no dehumidification effect, and it saves electricity, which is equivalent to a fan rotating. After defrosting and setting, the dehumidifier resumes work. This process takes about ten minutes to half an hour. Therefore, when used in a cold storage, because the indoor temperature is too low, the dehumidifier is particularly prone to frost or even freeze, which increases the defrosting time of the dehumidifier, reduces the dehumidification time, and affects the dehumidification effect.
Therefore, when we encounter icing on the fins of the dehumidifier, we should first confirm whether the machine has an automatic frost function. Now the general dehumidifier has this function. There are three reasons for the icing. 1. The temperature sensor is broken. When this happens, the automatic frost function will fail. Second, the compressor is Lufer, which will also freeze the fins. Third, is the indoor temperature too low? If it is used at a low temperature, such as in a cold storage, even if the machine is normal, this situation will occur because the indoor temperature is too low to use for long. So you can rule out the problem based on these several reasons.
The above is a brief introduction to the freezing method of Guangdong Aoyu. I hope to help you. For more information about dehumidifiers, please feel free to contact us at any time, or continue to follow our official website.