With the rapid development of industry and commerce, humidifiers have been used in more applications. Due to limited space, various electrical appliances will be placed closer together, which will cause many problems. So how to place and use industrial humidifiers reasonably?

　　Industrial humidifiers should be kept separate from other electrical appliances. The humidity emitted by the industrial humidifier will affect other electrical appliances, so pay attention to keeping the interval when using it. In addition, the industrial humidifier should not be leaning against the wall. The mist from such an industrial humidifier simply leaves a white mark on the wall.

Industrial humidifier

　　 Add water accurately: When using an industrial humidifier, do not touch the surface of the water with your hands, and do not use it in an empty tank. When moving, drain the water in the tank, not upside down. In addition, many industrial humidifiers add water after the water has evaporated, and the water filling port is below. Therefore, do not add water when the industrial humidifier is working to prevent damage to the industrial humidifier due to improper operation.

　　 Pay attention to cleaning: Industrial humidifiers should be changed every day and cleaned once a week. Otherwise, the water that is too long will become moisture and evaporate into the air, which will cause secondary pollution and harm your health. When cleaning, use a soft brush; wipe the sink and sensor with a soft cloth; the water tank can be cleaned with water and shake it two or three times and then dump it.

　　 Humidity is suitable: When using an industrial humidifier, the room humidity should be controlled. A healthy humidity environment is 45% to 65%. Under such humidity conditions, the human body feels the most comfortable, and various germs are difficult to convey. Too high humidity will cause discomfort to the human respiratory system and mucous membranes, while too low will cause the nasal cavity to be dry and skin molting, so when using industrial humidifiers, if there is no active constant temperature function, you can also buy a hygrometer by yourself. Stop humidification after moderate humidity.

　　 Clean water: Prevent the tap water from being poured directly into the water tank. The accurate method is to boil the water, let it cool, and then pour it into the water tank. This will not only kill the bacteria in the water, but also volatilize the chlorine. If conditions permit, boil purified water, let it cool down, and participate in the best results.

　　 Clean air: To make the air clean, we must first insist on indoor cleaning to prevent pollution sources. Of course, it is best to use industrial humidifiers with purification functions to filter harmful particles in the air to achieve the dual effect of purifying air and humidifying.