Kawada humidifier is a kind of equipment used to humidify air and eliminate dryness. Used in industry for anti-static and dust removal. Of course, it is also used by other industries to simulate high humidity environments to cool down, increase humidity, and promote growth. Someone bought an ultrasonic air humidifier, but felt it had no effect, because there was no fog coming out, which made our sales staff very confused. Today, the editor will introduce how to use the humidifier.
The first is that Kawada humidifier does not need to be installed. You only need to determine the water source according to the humidification program we set for you. We know that humidification can be divided into comprehensive humidification and partial humidification, which requires the installation of fog tubes. When installing the fog tube, you must remember that the pipe should be straight and can't be turned many times, but only one turn at most, because the power of the fan in the Kawada humidifier is not that big. If it turns too much, the fog will not reach it.
The second is that the mist outlet on the PVC pipe must be large, and the diameter should not be less than 2 cm. If the diameter is less than 2 cm, the mist is difficult to spray from the mist outlet, and dripping will occur over time. Many people who use Kawada humidifiers for the first time just say that Kawada humidifiers are not effective because the opening is too small and the mist cannot come out. As a result, our technicians asked him to increase the diameter of the fog outlet, and this problem was solved.
Third, the PVC fog tube should not be too long. Take the Zs-40 Kawada humidifier as an example, the farthest distance should not exceed 20 meters. If it exceeds 20 meters, there will be no fog coming out behind, because the power of the fan can only send the fog to this distance. If it exceeds 20 meters, there is no follow-up action. This is why the thousands of square meters or tens of thousands of invincible factories need multiple Kawada humidifiers to achieve the humidification effect. Some people's fog tube is more than 20 meters, and it can have a humidifying effect behind it, that's weird.
The above is what we need to pay attention to in comprehensive humidification. For partial humidification, it is relatively simple. For example, in the production of non-woven fabrics, static electricity has a great influence. This only needs to be done above the process affected by static electricity, or spray the mist outlet directly on the production equipment. However, we don't need to spray it on the wire connectors. If we do this, we won't think that the production is disturbed by static electricity enough, so we need to fill a little.
In fact, the principle of the air Kawada humidifier is to use ultrasonic high-frequency vibration to atomize water into ultra-fine particles of 1 to 5 microns, and then through the pneumatic device in the equipment, the fine water mist is diffused into the indoor air to make the indoor air moist and It is rich in negative oxygen ions, so as to achieve the purpose of fresh air, eliminate dryness, and create a comfortable environment. In winter, it can be used at home to eliminate dryness and protect family members. In industry, it can prevent electrostatic dust. Please remember that as long as the air is dry, you can use an ultrasonic air Kawada humidifier to solve it.