With the improvement of living standards, people use more and more dehumidifiers. However, many users have failed to grasp the correct use of the dehumidifier, so that it does not exert the best effect. Nystar is here to explain the use and maintenance methods of the household dehumidifier.

1. Use of dehumidifier:

1. After opening the packaging box, check whether the machine is in good condition, and focus on the outer packaging and shell of the machine. If you find that the machine is damaged in the logistics, you should contact the manufacturer in time to return and exchange the goods.

2. After connecting to the power, check whether the display is normal, including whether the display can display normally. The contents displayed include: current indoor humidity, water tank water level, fan running status, and machine dehumidification working status. If any problems are found, please contact the manufacturer or dealer for consultation in time.

3. It is necessary to set the dehumidifier correctly before starting the operation for the first time. Many users cannot operate the dehumidifier because the setting is incorrect. There are four keys on the control panel: 1>Press the plus and minus keys to increase or decrease the target humidity, and each press will increase or decrease the humidity by 1%. It should be noted that the target humidity must be set lower than the current humidity. 2>Press the timer button to set the time for the timer to turn on and off the machine, and the validity period is set once every time. 3>Because the dehumidifier has a three-minute delay protection function for the compressor, do not directly unplug the power when the dehumidifier is not needed, but press on/off to shut down.

2. Maintenance of dehumidifier:

1. When the water tank is full or is not used for a long time, pull out the water tank in time, pour out the water in the water tank, and then reinstall it to the original position. Especially when the used machine needs to be transported over a long distance, you must first check whether the water in the lower tank has been drained.

2. When we have used a dehumidifier, we need to clean the filter regularly to ensure the smooth ventilation of the machine and improve the air purification effect. The method is to first remove the air inlet grid barrier, then remove the filter screen for cleaning, and then install it back into the machine in order after completion.

3. When encountering a malfunction, do not disassemble or assemble the electrical components by yourself, please contact the manufacturer's after-sales service, and the maintenance will be guided by professionals.

In addition, two points need to be paid attention to: The first point is that the industrial dehumidifier uses a 380V industrial power supply, which needs to be installed by a professional electrician. The second point is that the effect of using conventional dehumidifiers in special environments such as low temperature or high temperature will not be obvious or even dehumidification. If there is a need for dehumidification under this very temperature, please contact the manufacturer to customize a non-standard dehumidifier.